Retro Dishwasher Rack Organizer for HEAVY Scrapbook Storage or Pot Lid Holder

Vintage industrial dishwasher rack in 'project' condition. The original vinyl coating is showing significant wear, including delamination (peeling) and cracking along the U-frame tines. There is visible oxidation (surface rust) where the metal core is exposed. While structurally sound, the coating requires sanding & touch-up with a product like 'ReRack' or 'Uber Goop' (liquid plastic/rubber coatings) to seal the rust and prevent further peeling.  NEEDS SOME REHAB  VERY STRONG!!!  Strong enough to hang on the wall  TOTAL measurements 20 in wide left to right 14 in wide with track attached to this side 5 1/2 in tall  The metal is 1/4 in thick consistently on all weight-bearing areas  (fits 8 1/2 and 10 1/2 lids side by side)  Specific measurements  track is 20 1/4 in long exactly. (2 tracks) 1 in tall exactly.   Rails (frame) around the frame 2 1/2 in tall   13 in x 20 in wide  Supports (u shaped supports) 5 in tall  3 1/4 in wide  (center dip inside measurements  starts out at 1 5/8 inches at top  and goes down to 1 in wide opening)  The metal is 1/4 in thick consistently on all weight-bearing areas   PLEASE ASK QUESTIONS ABOUT OTHER MEASUREMENTS   ----fits 12x12 scrapbook pages but not side by side  (14 wide)  -----Pictures shows heavy glass pot lids (not included) a 8 1/2 and 10 1/2 lids side by side  It has been cleaned. The bottom is in excellent condition and has been cleaned too.   ^838... weight 6 lb. 8.4 oz. Boxed